Updated November 2026

A 3 day full body workout split trains every major muscle group three times each week, usually on Monday, Wednesday and Friday. By the end of this guide you will have a complete, printable plan with exercise order, sets, rep ranges, rest periods and a simple way to add weight over time. The structure works well for beginners, for lifters coming back after a break, and for anyone whose schedule allows three sessions but not five or six.

Why a 3 Day Full Body Workout Split Works

Each muscle group gets hit three times per week in a 3 day full body workout split. Research on training frequency generally finds that training a muscle at least twice a week tends to produce better results than training it once, and this format gives you that frequency without asking you to train six days. Sessions also stay manageable. A full body day usually takes 50 to 70 minutes, which makes it easier to stay consistent over months.

Shopping for one? See our guide: 3 Day Full Body Split Workout Routine: Best Picks Compared (2026).

The trade-off is volume per session. You cannot do ten sets for every muscle in one workout without the session running long and your recovery suffering. That is why the plan below keeps each session focused on a handful of compound lifts with a few accessory exercises.

Before You Start: What You Need

Gather these basics before your first session:

  • A barbell with plates, or a set of adjustable dumbbells that reach the weights you need
  • A squat rack or sturdy stands for safe squats and presses
  • A flat bench and, if possible, an adjustable incline bench
  • A pull-up bar or a lat pulldown station
  • A training log, either paper or a notes app, to record weights and reps
  • A timer for rest periods

If you train at home with limited equipment, you can substitute goblet squats, dumbbell rows and push-ups for the barbell versions. Keep the movement patterns the same even if the implement changes.

The Weekly Plan

Train Monday, Wednesday and Friday, or any three non-consecutive days. Rest at least one day between sessions. Each session follows the same basic order: a squat or hinge pattern, a horizontal push, a horizontal pull, a vertical pull or press, and then one or two accessory exercises for arms, shoulders or core.

Workout A

Exercise Sets Reps Rest
Barbell back squat 3 6–8 2–3 min
Flat dumbbell or barbell bench press 3 6–8 2 min
Chest-supported or bent-over row 3 8–10 90 sec
Lat pulldown or pull-up 3 8–10 90 sec
Dumbbell lateral raise 2 12–15 60 sec
Plank 2 30–45 sec 45 sec

Workout B

Exercise Sets Reps Rest
Romanian deadlift 3 8–10 2 min
Overhead press (barbell or dumbbell) 3 6–8 2 min
Seated cable row or one-arm dumbbell row 3 8–12 90 sec
Incline dumbbell press 3 8–10 90 sec
Dumbbell curl 2 10–12 60 sec
Triceps pushdown 2 10–12 60 sec

Workout C

Exercise Sets Reps Rest
Leg press or goblet squat 3 10–12 2 min
Dumbbell or cable chest fly 3 10–12 90 sec
Single-arm dumbbell row 3 10–12 90 sec
Seated dumbbell shoulder press 3 8–10 90 sec
Hamstring curl 2 10–12 60 sec
Hanging knee raise or dead bug 2 10–12 45 sec

Alternate A, B and C across the week. A standard pattern is A on Monday, B on Wednesday and C on Friday, then A again the following Monday. Some lifters prefer B, A, B in alternating weeks; either rotation is fine as long as each workout appears roughly equally often.

How to Perform Each Session Well

Warm Up Properly

  1. Spend 5 minutes on light cardio such as walking, cycling or rowing.
  2. Do 10 to 15 unloaded reps of the first exercise, such as bodyweight squats.
  3. For your first working set of each main lift, use roughly half your working weight for 5 reps, then move up to working weight.

Choose Your Working Weight

For the first session, pick a weight you could lift for about two more reps than the target range. If you hit the top of the rep range on every set with good form, the weight is right. If you cannot reach the bottom of the range on the first set, drop the weight by 5 to 10 percent for the rest of the session.

Use Progressive Overload

The plan only works if you add load or reps over time. Use this simple rule: when you complete all sets at the top of the rep range with good form, increase the weight by the smallest jump available, usually 2.5 to 5 pounds on barbell lifts or 2.5 pounds per dumbbell on upper-body movements. If you cannot hit the bottom of the range for two sessions in a row, reduce the weight and rebuild.

Track Everything

Write down the exercise, weight, reps per set and how each set felt. Without records, it is easy to repeat the same weights for months without noticing. Many lifters find a weekly review of their log more useful than any app feature.

Sample Four-Week Progression

Week Focus Guideline
1 Learn the lifts Keep weights light enough that every rep feels controlled. Stop each set with 3 reps left in reserve.
2 Build working weights Move toward the top of each rep range. Add weight when you finish all sets.
3 Push the main lifts Squat, bench, row and press sets should feel challenging by the last rep.
4 Consolidate Repeat the heaviest weights you handled with good form. Take an easy day if joints feel sore.

After four weeks, take a lighter week or reduce total sets by about a third for a few days. Then start the cycle again with heavier starting weights.

Common Mistakes

  • Training too hard too soon. Beginners often start at near-maximum effort and burn out within three weeks. Leave two or three reps in the tank on most sets.
  • Skipping the warm-up. Five minutes of preparation and a few ramp-up sets reduce the chance of strains on heavy squats and presses.
  • Changing the plan every week. Progress comes from repeating the same movements and adding load. Frequent swaps make progression hard to measure.
  • Ignoring rest days. Three full-body sessions a week is a lot of total work. Sleep and adequate protein matter as much as the sets.
  • Letting form slip. If your back rounds on deadlifts or your lower back arches on bench press, reduce the weight. Heavier does not help if the rep is not clean.
  • Adding too many accessories. Keep accessory work to one or two exercises per session. The main lifts drive most of the results.

Tips for Making the Split Stick

  • Schedule sessions in your calendar like appointments and set a backup time for missed workouts.
  • Pack your gym bag the night before so the first decision of the morning is already made.
  • If a session falls apart because of time, do the main lifts and drop the accessory work. Three solid compound sets beat skipping the day.
  • Take a photo or measurement every four weeks, not every day. Trends are more useful than daily fluctuations.
  • If you feel persistent joint pain, numbness or sharp pain during a lift, stop and check with a doctor or physical therapist before continuing.

A few inexpensive items make this plan easier to run consistently at home or in a commercial gym:

  • Adjustable dumbbell set lets you increase load in small steps on upper-body lifts without buying a full rack of weights. View on Amazon
  • Lifting straps help with grip on pulls when your hands become the limiting factor on heavy rows and pulldowns. View on Amazon
  • Resistance bands work as warm-up tools and as a substitute on travel days when you cannot reach the gym. View on Amazon
  • Weightlifting belt can support heavy squats and deadlifts once you are regularly working in the upper rep and load range. View on Amazon

Before you begin any new strength program, especially if you have a past injury, heart condition or other medical concern, consult a doctor or qualified professional.

FAQ

Is a 3 day full body workout split good for beginners?

Yes. Training each muscle group three times a week gives beginners frequent practice on the main lifts while keeping individual sessions short. It is one of the most common starting structures in strength programs.

Can I do the same workout every session?

You can, but rotating between three workouts gives each muscle a bit more variety and prevents some overuse of any single movement. The A, B, C rotation above is a good default.

How long should each workout take?

Most people finish in 50 to 70 minutes including warm-up. If you need less time, remove one accessory exercise per session rather than cutting the main lifts.

How many days of rest should I take between sessions?

Aim for at least one full day between sessions. Monday, Wednesday and Friday is the classic pattern. Adjust if you need a longer break, but avoid training the same muscles on consecutive days.

What if I can only train two days a week?

Two full-body sessions still build strength, though progress is slower. Keep the same main lifts and drop the accessories first. Add the third session when your schedule allows.

Should I do cardio on these days?

Light cardio on training days or on separate days is fine. Keep high-intensity conditioning limited if you are also trying to push heavy lifts, since excessive fatigue can reduce the quality of your sets.

When should I change the program?

After 8 to 12 weeks of consistent progress, you can switch to heavier rep ranges, add a set to the main lifts, or move to a different full-body or split program. If progress has stalled for three or more weeks despite good sleep and eating, adjust volume or load.

Conclusion

A 3 day full body workout split gives you frequent practice on the key movements, short enough sessions to stick with, and a clear way to progress. Follow the A, B, C rotation, track your weights, and add load when you hit the top of each rep range. Stay consistent for at least eight weeks before judging the results, and adjust only when the data tells you to.

Graham Fisher

About Graham Fisher

Graham Fisher is part of our editorial team and reviews and edits our workout programs & splits guides, checking product details against manufacturer specifications and owner feedback.