Updated November 2026
A push pull legs CoolCicada routine is a way of organizing your training around resistance-band and home-gym movements, grouped by muscle function: pushing, pulling and legs. This guide walks you through how the split is structured, how to set sets, reps and rest, how to progress week to week, and which mistakes tend to stall results. By the end you will have a printable weekly plan you can start this week.
The split itself is not unique to any one brand. It is a classic training template that CoolCicada band sets and home accessories are often used to support. The principles below apply to any push pull legs program built on resistance bands, so you can adapt them to whatever equipment you own.
Shopping for one? See our guide: 7 Best Push Pull Legs Split Programs and Tools for 2026.
What the Push Pull Legs Split Covers
Push pull legs divides your training into three movement categories. Push days hit the chest, front and side delts and triceps. Pull days hit the lats, upper back, rear delts and biceps. Leg days cover quads, hamstrings, glutes and calves. Most people run this split three to six days a week, rotating through the three categories so each muscle group gets trained about twice per week.
Resistance bands work well in this structure because they provide tension through the full range of motion, and they are easy to anchor to a door, a sturdy post or a squat rack. You can also use them as accessories alongside a few dumbbells or bodyweight work.
Why the Split Works
- Muscles that work together on the same day (for example, chest and triceps) share the load without overlapping fatigue on the next day.
- Each muscle group gets a recovery window of roughly 48 to 72 hours before it is trained again.
- Training is easy to schedule because each day has a clear focus.
For a broader comparison of how this split stacks up against other approaches, see Push/Pull Legs vs Full Body (2026): Which Is Better for Your Goals? and Upper Lower vs Push Pull Legs (2026): Which Is Better for Your Training?.
Step 1: Choose Your Weekly Frequency
Pick a frequency that fits your schedule and recovery. Beginners usually do well with a three-day rotation: Push, Pull, Legs, then rest, then repeat with a rest day after the third session. Intermediate lifters often move to six days, running Push, Pull, Legs, Push, Pull, Legs with one rest day. Both approaches train each muscle group about twice a week.
| Schedule | Days Per Week | Best For | Frequency Per Muscle |
|---|---|---|---|
| Push / Pull / Legs (3-day) | 3 | Beginners, busy schedules | Once per week |
| PPL + rest rotation (6-day) | 6 | Intermediate, muscle growth | Twice per week |
| PPL x 2 (4 to 5 days) | 4 to 5 | Balanced volume and recovery | Roughly twice per week |
Step 2: Set Up Your Equipment
Before your first session, gather what you need and set up an anchor point. Most band exercises require a secure attachment, so check that your door anchor or post is stable before you load it.
Equipment Checklist
- A set of resistance bands with varying tension levels (light, medium, heavy).
- A door anchor or a sturdy fixed point for rows and pulldowns.
- Handles and ankle straps if your band set includes them.
- A mat for floor work and glute bridges.
- A timer or phone for tracking rest periods.
- A notebook or app to log loads, reps and progress.
Step 3: Build Your Push Day
Push days target the chest, shoulders and triceps. Start with a compound movement, then move to isolation work. A standard push day with bands might look like this:
- Band chest press: 3 sets of 8 to 12 reps, rest 90 seconds.
- Standing overhead press: 3 sets of 8 to 10 reps, rest 90 seconds.
- Band chest fly: 3 sets of 12 to 15 reps, rest 60 seconds.
- Lateral raise: 3 sets of 12 to 15 reps, rest 60 seconds.
- Overhead triceps extension: 3 sets of 10 to 12 reps, rest 60 seconds.
- Band pushdown: 2 to 3 sets of 12 to 15 reps, rest 45 seconds.
Keep your torso braced and avoid letting the bands pull your shoulders forward. If you feel the movement in your neck or lower back, reduce the band tension.
Step 4: Build Your Pull Day
Pull days cover your back and biceps. Aim to balance pushing volume with pulling volume so your shoulders stay healthy. A sample pull day:
- Band pulldown: 3 sets of 10 to 12 reps, rest 90 seconds.
- Seated band row: 3 sets of 8 to 12 reps, rest 90 seconds.
- Single-arm band row: 3 sets of 10 to 12 reps per side, rest 60 seconds.
- Face pull: 3 sets of 12 to 15 reps, rest 60 seconds.
- Band bicep curl: 3 sets of 10 to 12 reps, rest 60 seconds.
- Hammer curl: 2 to 3 sets of 10 to 12 reps, rest 45 seconds.
Step 5: Build Your Leg Day
Leg days are often the hardest to recover from, so do not skip warm-up sets. Band-based leg training works best with squats, hinges and glute isolation.
- Band squat: 3 sets of 10 to 15 reps, rest 90 seconds.
- Romanian deadlift with band: 3 sets of 10 to 12 reps, rest 90 seconds.
- Glute bridge with band: 3 sets of 12 to 15 reps, rest 60 seconds.
- Lateral band walk: 2 sets of 12 steps each direction, rest 45 seconds.
- Seated or standing leg curl: 3 sets of 12 to 15 reps, rest 60 seconds.
- Standing calf raise: 3 sets of 15 to 20 reps, rest 45 seconds.
Step 6: Apply Progressive Overload
Progressive overload means making each workout slightly harder than the last. With bands, you have three main levers:
- Increase band tension: move to the next heavier band once you can complete the top of your rep range for all sets with good form.
- Add reps: aim to add one or two reps per set each week until you hit the top of the range.
- Slow the eccentric: lower the band over 3 seconds instead of 1 second to increase time under tension.
Sample Progression Across Four Weeks
| Week | Focus | Example (Band Chest Press) |
|---|---|---|
| 1 | Learn form, moderate band | 3 x 8 reps, medium band |
| 2 | Add reps | 3 x 10 reps, medium band |
| 3 | Hit top of range | 3 x 12 reps, medium band |
| 4 | Increase tension | 3 x 8 reps, heavy band |
If you are unsure how to scale volume across a full program, Push Pull Legs Workout Plan: 6-Day Split With Sets and Reps shows a complete example with set counts laid out day by day.
Step 7: Plan Warm-Ups and Recovery
Spend five to ten minutes warming up before each session. Light band pull-aparts, arm circles, bodyweight squats and a few light sets of your first exercise prepare the joints and muscles. After training, stretch the muscles you worked for 20 to 30 seconds each. Sleep seven to nine hours when you can, since recovery is where growth happens.
Common Mistakes
- Using bands that are too light. If the last two reps feel easy, the band is too light. Move up.
- Skipping the pull work. Doing more pushing than pulling can lead to rounded shoulders and shoulder pain over time.
- Rushing the reps. Bands are most effective when you control the lowering phase.
- Changing exercises every week. Keep the same movements for at least four weeks so you can measure progress.
- Ignoring rest days. Recovery drives adaptation. Two rest days per week are a good minimum for most people.
- Letting bands slip. Check anchors and handles before each set to avoid injury.
Pain that is sharp, joint-focused or lingers beyond a few days should be checked by a doctor or physical therapist before you continue. Anyone with a medical condition should get clearance before starting a new training program.
Recommended gear
A few pieces of equipment make band-based push pull legs training more effective and easier to run at home.
- Resistance band set with multiple tension levels: Having light, medium and heavy bands lets you progress without buying new equipment every month. View on Amazon
- Door anchor: A secure anchor lets you perform rows, pulldowns and face pulls anywhere with a solid door. View on Amazon
- Padded ankle straps: These let you train glute kickbacks and leg curls without gripping the band with your hands. View on Amazon
- Exercise mat: A non-slip mat protects your floor and keeps you stable during glute bridges and floor work. View on Amazon
FAQ
How many days a week should I run push pull legs?
Three days is a good starting point for beginners, since it gives each muscle group one focused session per week. Intermediate lifters often train six days, which trains each muscle about twice weekly. Choose the number that matches your recovery and schedule.
Can I build muscle with only resistance bands?
Yes, especially when you progress band tension and reps over time. Bands provide meaningful resistance, though very heavy loads may require additional equipment to keep progressing indefinitely.
How long should I rest between sets?
Rest 60 to 90 seconds for isolation exercises and 90 to 120 seconds for compound lifts such as squats and rows. Longer rest is appropriate when you are training near maximum effort.
How do I know when to move up to a heavier band?
Move up when you can complete the top of your target rep range for every set with good form and a controlled tempo. If you are hitting the top of the range on the first set but failing on the last, stay at the current band.
Should I train to failure on every set?
No. Stop each set with one to three reps left in the tank for most exercises. Training to complete failure on every set increases fatigue and injury risk without a clear benefit for most people.
What if I miss a workout?
Skip the missed session and continue with your next scheduled day. Do not try to double up or compress two days into one, since recovery matters more than any single workout.
Is push pull legs good for beginners?
It can be, provided you start with a lower frequency and focus on form. A three-day rotation with moderate volume is usually easier to manage than a six-day program. Beginners who are new to resistance training may also benefit from a simpler full-body approach first.
Do I need to warm up before every session?
Yes. A short warm-up of five to ten minutes reduces the risk of strains and helps you move through your full range of motion. Include light band work and a few warm-up sets of your first exercise.
Conclusion
A push pull legs CoolCicada routine gives you a clear, repeatable structure built around pushing, pulling and leg movements. Start with a frequency that suits your schedule, set your sets and reps using the ranges above, and progress by adding reps or moving to heavier bands. Track your workouts, keep your pulling volume balanced with your pushing, and give yourself adequate recovery. Consistency over several months will matter far more than any single session.
