Updated November 2026
An upper/lower split workout plan PDF gives you a four-day training week with two upper-body and two lower-body sessions, each built around clear sets, rep ranges and progression rules you can print and tape to the squat rack. By the end of this guide you will have a complete weekly template, a sample session for each day, a method for adding weight over time and a checklist for keeping your records tidy. The plan works well for intermediate lifters and for beginners who have finished a few months of full-body training.
What an Upper/Lower Split Is and Why It Works
An upper/lower split divides your training into upper-body days (chest, back, shoulders, arms) and lower-body days (quads, hamstrings, glutes, calves, and often the core). You alternate them across the week, usually training each body region twice. Because each session covers fewer muscle groups than a full-body workout, you can give each lift more volume and more focused effort without turning a single session into a two-hour grind.
Shopping for one? See our guide: 3 Best 4 Day Upper Lower Split Workout Routine Options for Every Lifter (2026).
The split also makes recovery easier to manage. Your upper-body muscles get a rest day while your legs work, and vice versa. Most people find this structure easier to stick with than a six-day push/pull/legs schedule, and it still hits every major muscle group at least twice a week, which is the frequency most training guidelines point to for building muscle.
Choosing the Right Schedule
The standard template is Upper, Lower, Rest, Upper, Lower, then two or three rest days. If your week is tight, you can run the sequence Monday through Thursday and leave Friday to the weekend. What matters most is that you never schedule two lower-body days back to back, because the leg sessions are demanding and you need a recovery gap before the next one.
| Day | Session | Focus |
|---|---|---|
| Monday | Upper A | Heavier pressing and rowing |
| Tuesday | Lower A | Squat-dominant emphasis |
| Wednesday | Rest | Recovery, walking, mobility |
| Thursday | Upper B | Vertical pressing and pulling variations |
| Friday | Lower B | Hinge-dominant emphasis |
| Saturday–Sunday | Rest | Full recovery |
Labeling the sessions A and B is a useful habit. It lets you alternate heavy and lighter exercise choices within each body region across the week, which helps manage fatigue.
Building Your Printable Workout Plan
Step 1: Pick Your Exercises
Each session should have four to six main exercises. Start with compound lifts, which work several joints and muscle groups at once, then add isolation work to finish. A sample set for each day is shown below.
- Upper A: Barbell bench press, barbell row, overhead press, lat pulldown, dumbbell curl, triceps pushdown
- Lower A: Back squat, Romanian deadlift, leg press, seated leg curl, standing calf raise, hanging knee raise
- Upper B: Incline dumbbell press, pull-up or assisted pull-up, seated cable row, dumbbell lateral raise, face pull, hammer curl
- Lower B: Trap bar deadlift, Bulgarian split squat, leg extension, lying leg curl, seated calf raise, cable crunch
Step 2: Assign Sets and Rep Ranges
For strength-focused main lifts, use 3 to 5 sets of 3 to 6 reps with 2 to 3 minutes of rest. For hypertrophy-focused accessory work, use 3 sets of 8 to 12 reps with 60 to 90 seconds of rest. A typical Upper A session might look like this:
- Barbell bench press: 4 sets of 5–7 reps
- Barbell row: 4 sets of 6–8 reps
- Overhead press: 3 sets of 6–10 reps
- Lat pulldown: 3 sets of 10–12 reps
- Dumbbell curl: 2 sets of 10–15 reps
- Triceps pushdown: 2 sets of 10–15 reps
Step 3: Use Double Progression
Double progression is the simplest way to build the plan over weeks. Choose a rep range, such as 8 to 12. Start at the low end with a weight you can lift for all sets. Each session, add a rep. When you reach the top of the range on every set, increase the weight by the smallest jump your equipment allows, usually 2.5 to 5 pounds for upper-body lifts and 5 to 10 pounds for lower-body lifts, then drop back to the bottom of the range.
Step 4: Format the PDF
Create a one-page template with these columns: exercise, sets, reps, target weight, actual weight, and notes. Leave space to log the date and how each session felt. Print two copies per week so you can keep one in your bag and one at home. If you prefer a digital file, save it as a PDF with a fillable form or a simple table so you can type into it on a tablet.
Sample Printable Checklist
Before you start any session, confirm you have the following:
- Your printed or saved workout PDF for that day
- A training log or pen for recording weights and reps
- Warm-up plan: 5 minutes of light cardio plus 2 to 3 ramp-up sets for your first lift
- Access to the equipment you need, including barbells, benches, cables and a leg press
- A timer or phone for rest intervals
- A water bottle within reach
Warming Up and Cooling Down
Warm up with 5 to 10 minutes of low-intensity movement, then perform two or three ramp-up sets of your first exercise, using about 50 percent, 70 percent and 85 percent of your working weight. For lower-body days, include some bodyweight squats, hip hinges and leg swings. After training, spend a few minutes on light stretching for the muscles you trained. Stretching does not need to be long to be useful.
Common Mistakes
- Training the same region on consecutive days. Keep at least one rest day between upper and lower sessions of the same type when possible, and never stack two leg days in a row.
- Adding too much weight too fast. Stick to the double progression rule. Small, consistent jumps beat large, sloppy ones.
- Skipping the log. Without written numbers, it is hard to tell whether you are progressing. Record every session.
- Ignoring recovery. Poor sleep and under-eating reduce the benefit of any program. Aim for regular sleep and enough protein across the day.
- Chasing failure on every set. Most working sets should end with one to three reps left in the tank. Going to failure often costs you recovery without adding much benefit.
Tips for Sticking With the Plan
Run each block of the program for four to six weeks before making changes. Swapping exercises every few days makes it impossible to track progress. If an exercise aggravates a joint, substitute a similar movement rather than pushing through pain. Keep a backup session for days when you have less time, such as the main lifts plus two accessories instead of the full list.
The best program is the one you can run consistently. A printed plan you follow for twelve weeks beats a perfect plan you abandon in week two.
Recommended gear
A few pieces of equipment make a split like this easier to run at home or in a gym with limited space.
- Lifting straps help you keep grip from limiting your pulling sets, especially on heavy rows and deadlift variations. View on Amazon
- Adjustable dumbbells let you match the incremental weight jumps in double progression without buying a full rack. View on Amazon
- A weightlifting belt can support heavy squats and deadlifts when you are working in the 3 to 6 rep range. View on Amazon
- A training log notebook gives you a dedicated place to record weights and reps each session. View on Amazon
If you want more detail on how this split compares with other schedules, see Upper/Lower Split vs Push/Pull/Legs (2026): Which Is Better for Your Training? and Full Body Workout vs Upper Lower Split (2026): Which Should You Choose?. For a six-day alternative with a printable layout, check Push Pull Legs Workout Plan PDF: A Printable 6-Day Split With Sets and Reps. Lifters who want to plan rest days around their split will find useful ideas in Push Pull Legs Rest Upper Lower-Rest: How to Plan Recovery Days in Your Split.
FAQ
How many days a week should I train on an upper/lower split?
Four days is the standard, with two upper and two lower sessions. Three days is possible if you rotate the sessions, and five days can work for experienced lifters who recover well. Always leave at least one full rest day per week.
Can I follow an upper/lower split plan as a beginner?
Yes, though many beginners start with full-body training for a few months first. If you choose the split early, use lighter weights, fewer sets and a focus on learning good form on each lift.
How long should each workout take?
Most sessions take 50 to 75 minutes including warm-up. If yours runs much longer, cut one or two accessory exercises or reduce rest periods on isolation work.
How much should I rest between sets?
Rest 2 to 3 minutes after heavy compound lifts and 60 to 90 seconds after accessory work. Longer rests are fine if you need them to hit your target reps.
What if I miss a session?
Do not try to double up the next day. Pick up the sequence where you left off, or simply skip the missed session and continue the rotation. Consistency across weeks matters more than any single workout.
Should I train to failure?
Most working sets should leave one to three reps in reserve. Taking a set to true failure occasionally can be useful, but doing it on every set tends to hurt recovery and form.
Is a printable PDF plan better than an app?
Neither is better in general. A printed sheet is simple and distraction-free, while an app can calculate progression automatically. Choose whichever you will open every session.
Should I see a professional before starting a new program?
If you have a heart condition, joint injury, recent surgery or any health concern, consult a doctor or a qualified physical therapist before beginning a new lifting program, and ask a certified coach to check your form on the main lifts.
Conclusion
An upper/lower split gives you a balanced four-day week with two sessions for each body region and a simple system for adding weight over time. Print the template, fill in your starting weights and log every session. Stick with the plan for at least four to six weeks before changing anything, and adjust only when the numbers tell you to.
